Bracelet Adjustment Instructions

All watches come with a watch tool set that includes a screwdriver, a pin pusher tool, and a microfiber cloth. These are required to help you remove links and adjust your bracelet size as needed. We have put together a step by step guide below to help you through the process.

For Oyster and Jubilee style bracelets:

Removing links:

Step 1. Determine how many extra links need to be removed for your wrist size. Then use the included screwdriver to unscrew the screws.

Step 2. Use the included flat head screwdriver to remove the bracelet screw. Optionally, you may use needle nose pliers, not included, to help remove it. Remove as many links as needed to achieve the desired fit. Then reinstall the screws and tighten them fully into place.

Adjusting the micro adjust clasp:

Step 1. Begin by pulling firmly on the link closest to the clasp until it lifts.

Step 2. Next, slide the link inward or outward within the clasp to adjust the size.

Step 3. After adjusting, press the link securely back into the clasp.

For all rubber bracelets:

Step 1. First locate the pin, then remove the push pin using the provided tool.

Step 2. Once the pin is removed, you will see several adjustment notches on the clasp. Find the notch that best fits your wrist size. For a more precise fit, you can also move the push pin to different positions on the strap.

Step 3. To reinstall the push pin on the clasp, insert the bottom end of the pin into the notch, then press the top side into the aligned upper notch.

Step 4. Make sure to pull lightly on the strap to confirm that the pin is fully inserted into the clasp before wearing the watch, ensuring the strap is securely fastened.

Hand Built

Each piece is assembled with care

Original Movements

Powered by trusted original movements

2 Year Warranty

Covered by our 2 year warranty